Walkable structural unbreakable anti slip laminated glass for floor

Specialist Anti-Slip Glass

There is a range of anti-slip glasses available which have an etched/raised pattern on the walking side which generates slip resistance. The slip resistance you get depends on the type of glass you go for. JIMY GLASS can custom anti slip pattren base on your demand. As this is specially manufactured glass it does have a slightly reduced maximum size when compared to normal toughened glass. It is also available in a clear design or an acid etched finish for privacy through the glass unit.

Sandblasted Finish

A sandblasted finish to a walk on glass structure is the standard option. A full 100% sandblasted finish to a glass floor will achieve a PTV (Pendulum Test Value) of approx. 50 in wet conditions. In most projects, a PTV of over 36 is classed as a slip-resistant surface so a sandblasted surface offers a good level of anti-slip. Sandblasted glass offers a translucent finish to the glass surface. That means that you will still achieve high levels of light transmission, but the glass will offer a ‘private’ finish, meaning that you get no vision through a walk on glass unit.

Ceramic Fritted Pattern

Similar to a sandblasted pattern, a ceramic fritted pattern can achieve transparency through a glass floorlight by interspersing areas of ceramic frit with transparent glass. This type of finish is extremely hard wearing as the ceramic is baked into the top surface of the glass, thus becoming structurally bound into the glass. The areas of ceramic give you an element of slip resistance to the glazing whilst maintaining transparency. JIMY GLASS has lots of design options available for ceramic frit patterns. You can have almost any colour of ceramic as well as any pattern from JIMY GLASS.